The above wires consist of two Class 6 copper conductors that are parallel to each other, covered by a white PVC insulation.
The above wires are used for wiring the building, such as chandelier lighting, and in wiring some electrical appliances.
Due to the low cross-sectional area of this type of wire, it should be noted that they are not suitable for using high-consumption electrical appliances.
Due to the single sheathed and the type of use of this wire, the insulation used in it is PVC type D, which has a high quality and is resistant to stress and abrasion caused during wiring. Therefore, the use of wires that insulation is easily separated from the surface of the wire and are brittle can cause the wires to connect.
Ofogh Alborz Company produces flat Ribbon cable based on ISIRI 607-5 national standard, specific(characteristic) code (607)42.
The abbreviation for these wires is H03V-H.
CHARACTERISTICS
Voltage Rating (U0.U) (Um)
12/20 (24) kV
Test Voltage
42 KV
Temperature Rating
-20°C to +90°C
Short Circuit Temperature
+250°C
Minimum Bending Radius
15 x Overall Diameter
Sheath Color
Red
Conductor
Class 2 stranded aluminum conductor
Inner Semi-Conductive Layer
Semi-conductive material
Insulation
XLPE (Cross-Linked Polyethylene)
Outer Semi-Conductive Layer
Semi-conductive material
Screen
Copper wires with copper tape
Sheath
PVC (Polyvinyl Chloride)
To be laid directly in ground, outdoors, indoors and in Medium voltage cables for distribution networks, also for connection to generation units and and where mechanical plant and process connection .damages are not to be expected
- Standard: IEC 60227-3, VDE 0250, BS-6004,ISIRI(607)02
