blog

cable lug connector terminal and crimping tool ( 63kva.com)

bimetal lug

cable lug connector terminal 

According to the different installation methods and structural forms, equipment lugs are divided into two types: bolt type and compression type.

The function of the cable lugs is to connect the cable to the electrical appliance, other cables, surface, or mechanical equipment. You can buy various industry-standard cable lugs at 63kva . 63kva  has a wide range of cable lugs for terminating or connecting cables, like DTL bimetallic aluminum terminal lugs, DL cable terminal lugs, DT copper terminal lugs, etc.

  • High welding strength
  • High electrical performance
  • High electrical and corrosion resistance
  • Long service life
  • Not easy to break, high safety performance

1.lug bimetal connector terminalbimetal lug

Bimetallic Lugs are constructed using a copper palm and aluminum barrel and are used to terminate aluminum conductors onto copper bus bars. Using these lugs in control panels, switchgear, and combiner boxes in Solar Plants prevents corrosion and ensure longevity.

What happens when you connect copper and aluminum?

One reason aluminum and copper connections fail is because the properties of the two metals are different. For example, the thermal expansion of aluminum is about 25% more than copper. As temperature increases, the aluminum expands more than the copper, which forces some distortion of the conductors

2.copper cable lug terminal

Terminal Lugs are designed to permit connection to a terminal. They can often be easily mounted to any post, stud or chassis and come in a wide variety of shapes and sizes, making it easy to find the right one for your electrical application.
cable terminal (plural cable terminals) A fixture designed to be installed in the end of a cable or a conductor in order to facilitate the connection.
 

  Ring terminallug terminal

Ring terminals connect two or more wires to a single connection point, such as a circuit protection device. Ring terminals are often used in the automotive industry and are ideal for connecting mechanical relays or contactors to engines or other automotive circuits.

Fork terminal

Fork Terminals are a type of connector used to attach a wire or wires to a stud, bus bar, or another part of an electrical system. A fork terminal is commonly used to help prevent frayed wires and offer a high level of protection

Female terminal

A female connector is a connector attached to a wire, cable, or piece of hardware, having one or more recessed holes with electrical terminals inside, and constructed in such a way that a plug with exposed conductors ( male connector ) can be inserted snugly into it to ensure a reliable physical and electrical

Pin terminal

Pin terminals are small devices that can offer quick and easy connections in applications where set screws are used to make electrical contact with the conductor wire.

 

Back to list

Leave a Reply

Your email address will not be published.